WHYNTER 21 Bottle Dual Temperature Zone
Wine Cooler
MODEL# : WC-211DZ
SB/W
Instruction Manual
Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before
using product to ensure proper use. Keep this manual in a safe place for future reference.
1. Parts and Features
1. DOOR HINGE
2. INTERIOR LIGHT
4. TEMPERATURE DISPLAY
6. WINE RACK
3. TEMPERATURE CONTROLLER
5. FAN MASK
7. STANDS
8.DOOR FRAME
9. TEMPERED GLASS DOOR
10.HANDLE BAR
2. Technical Data
Model no.
WC-211DZ
Capacity
60L (21 standard wine bottles)
Voltage
110v
1Amp
Current
Input power
140W
Power
1.2(59°F)
Consumption(KW.h/24h)
Max Temperature Difference
Temperature Control Range
﹥64°F
Up Zone 7-18℃(44-66 ºF)
Lower Zone 10-18℃(50-66 ºF)
45 lbs
Net weight
Gross weight
50 lbs
Product size(W×H×D)
13.4” × 32.3” × 20.8” (21.7” with handle
installed)
Packing size(W×H×D)
15” × 33.5” × 21.6”
3. Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when using your appliance,
follows these basic precautions
Do not use if the power supply cord is damaged. If damaged, it must be replaced by a
qualified electrician.
This wine cooler is not intended for use by young children or physically-challenged
persons without supervision/assistance. Young children must be supervised to ensure
safety around this or any appliance.
Ensure the unit is unplugged before cleaning or when not in use.
To clean the unit, use only mild detergents or glass cleaning products. Never use harsh
detergents or solvents.
Do not use this wine cooler with an extension cord or power board. Please ensure that
the appliance is plugged directly into the electrical outlet.
When positioning the wine cooler, ensure that there is at least a 2” clearance at the
sides and a 4” clearance at the back. This will allow for adequate ventilation of any heat
generated by the wine cooler.
This cooler is designed to store wine bottles. If food is stored inside, ensure that there is
sufficient airflow between items. Please note that the temperature range for this cooler
is optimized for wine and beverage storage. Perishable food items may require a
different storage environment.
Do not place hot food or beverages into the wine cooler.
Close the cooler door immediately after putting in any items to keep the internal
temperature relatively constant.
Keep appliance away from any heat source or direct sunlight.
For a stable installation, make sure the appliance is placed on a flat, level and solid
surface.
Ensure that the surface on which the wine cooler is placed is strong enough to hold the
wine cooler and the items stored inside.
Avoid placing any objects on top of the wine cooler.
The wine cooler is an electrical appliance. To avoid injury from electrical shock do not
operate the Wine Cooler with wet hands, while standing on a wet surface or while
standing in water. Do not use outdoors or in wet conditions.
When positioning or moving the appliance ensure that it is not turned up side down or
greater than 45° or more off level.
Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from the
outlet.
Never lift or carry the wine cooler by the power cord.
This wine cooler is designed for household, non-commercial use only. Any other use will
void the warranty.
Do not plug into the power outlet before set up is completed.
An empty cooler can be a hazardous for children or small pets. If disposing of the cooler
remove gasket seals, latches, lids or the entire door from your unused appliance, or take
other action to ensure the cooler is harmless.
Do not cut or remove the ground prong from the power cord.
Do not move this appliance without emptying it and securing the door in a closed
position.
4. Installation
Before using your wine cooler
Remove the exterior and interior packaging material
Stand the unit upright for approximately 2 hours before connecting to the power
source. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
Clean the interior surface with a soft cloth and warm water.
Place your appliance on a floor that is strong enough to support the appliance
when it is fully loaded.
Do not place the appliance in direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase the ambient temperature and electrical consumption. Extreme
cold or hot ambient temperatures may also cause the appliance to malfunction.
Allow up to 24 hours of operation for the wine bottles to reach the desired
temperature.
Electrical Connection
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician.
This appliance should be properly grounded for your safety. The power cord of this unit is
equipped with a 3-pin plug to minimize the possibility of electrical shock. Do not under any
circumstances cut or remove the ground wine from the power cord supplied.
Use of extension cords is not recommended.
This unit requires a standard 110V-60HZ electrical outlet with 3-pin plug.
To prevent accidental injury, the power cord should be secured behind the wine refrigerator
and not left exposed or dangling.
5. Operations
Temperature Setting
It is recommended that you install the wine cooler in a place where the ambient temperature is
between (60- 80°F). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing in extreme cold or hot
conditions may cause interior temperature to fluctuate thus the set temperature may not be
achievable.
You can set the wine cooler temperature by pressing the “ ” and “ ” buttons on the control
panel.
Temperature settings for upper zone: 44ºF-66ºF (Left side control panel)
Temperature settings for lower zone: 50ºF-66ºF (Right side control panel)
Generally for red wines, the temperature range should be between 57ºF – 61ºF and for white
wines, the temperature range should be 50ºF - 54ºF. This is based on an ambient room
temperature of 77ºF.
Interior Light
You can turn on and off the interior light by pressing the “Light” button. The “Light” button on the
left side controls the upper zone light and the “Light” button on the right side controls the lower
zone light.
Handle Bars
Your wine cooler comes with a towel bar style handle. To install the handle, you will need a
Phillips-head screwdriver.
Open the door of the wine cooler.
Located the two screw holes on the inside of the door (they may be partially obscured by
the door seal so you may need to remove the door seal)
Insert the screws into the screw holes until they stick out of the front of the door.
Line up the holes in the handle with the screws and give each screw about 2-4 full turns
into the handle bar.
Now the turn the screws in all the way, and your handles are installed.
Replace seal into door frame.
Bottle Capacity
This wine cooler is designed to store 6 bottles in the upper zone and 15 bottles in the lower zone.
The bottle capacity listed for your wine cooler is an estimated maximum capacity based on a
standard 750ml wine bottle. For other size bottles, the capacity will vary.
Leveling Legs
Your wine cooler comes with four leveling legs. To adjust these legs, carefully lean the wine
cooler to one side (make sure it is emptied and the door is secured) and unscrew the legs to
make them longer. Screw the legs tighter to make them shorter. This wine cooler is not
designed to operate without the leveling legs
Wine Racks
The individual wine racks have a slight difference between the top and a bottom of the racking.
If you are having trouble fitting the maximum number of bottles of wine in the wine cooler, try
flipping the wine racks over to accommodate the shape of the bottle.
Air Filter
Your wine cooler has a washable air filter over the air intake in the back. Periodically, this air
filter should be cleaned. Remove the air filter and gently wash it in a solution of mild detergent
and water. Make sure it is completely dry before installing it back to the air intake.
Energy Saving Tips
Do not locate the wine cooler in direct sunlight or any heat generating sources. Let any warm
items cool before placing them in the wine cooler.
6. Care and Maintenance
Cleaning your wine cooler
Unplug the wine cooler.
Remove all items from the wine cooler.
Wipe the inside and outside surface with a mild soap.
Wash the wine racks with a mild soap.
Dry any moist parts with a soft cloth.
Moving your wine refrigerator
Unplug the wine cooler.
Remove all items from the wine cooler.
Securely tape the door of the wine cooler.
Turn the leveling legs (tightly shorten) up to the base to avoid damage.
Be sure the wine cooler stays in the upright position during transportation.
The ideal packaging for the wine cooler is its original packaging. Please keep the
original packaging and repack the wine cooler if you need to transport the unit.
7. Troubleshooting
You can solve many common problems by referring the troubleshooting suggestions listed
below.
Symptoms
The wine
Possible causes
There is a power failure.
The cooler is not plugged in.
Solutions
Ensure the cooler is plugged in and the
power outlet has power.
cooler does
not turn on.
A house fuse has blown or the
circuit breaker is tripped.
Replace the broken fuse or reset the
breaker.
The wine
The cooler is placed too close to a Keep the cooler away from sunshine or
cooler is not
reaching the
desired
heat source.
other heat sources.
The cooler does not have
sufficient ventilation.
Make sure the wine cooler has at least 4” of
temperature.
ventilation on the sides and back.
The door is opened too frequently Close the door tightly and do not open the
or for a long period of time.
door too frequently or for a long period of
time.
Frost forming
inside the
The environment is too humid.
Although this unit uses an auto-defrost
system, under certain conditions, manual
defrosting may required. If frost builds up, try
running the cooler on a warmer temperature
setting.
wine cooler.
The ambient temperature is too
low.
Close the door tightly and do not open the
door too frequently or for a long period of
time.
The door is opened too frequently Unplug the unit to allow the frost to melt.
or for a long period of time.
The wine
The ambient temperature is too
low or high.
Decrease or increase the ambient
temperature.
cooler turns
on and off
frequently.
The door is being opened often.
Minimize the number of times the door is
opened.
The door is not completely closed. Make sure the door is tightly closed.
The door gasket is not sealing
properly.
Make sure the door gasket is properly
sealed.
The cooler does not have the
suggested ventilation.
Make sure the cooler has at least 2” on the
sides and 4” in the back for clearance.
The wine
cooler makes
too much
noise.
If the noise is from the fan, it may The fan makes normal fan noises.
be normal operating noise.
The unit is not level.
Make sure the cooler is on a hard and level
surface. Do not place the wine cooler on
carpet.
Popping or cracking noises are
coming from the unit.
Some popping or cracking noises are
normal. They are caused by expansion and
contraction of the inside walls due to
temperature changes.
The unit is not level.
Make sure the cooler is on a level surface.
The door will
not shut
The door gasket is dirty.
The door gasket is malformed.
Clean the door gasket.
properly.
Make sure the door gasket is properly
sealing.
The shelves are incorrectly
installed.
Correctly install the shelves.
ONE YEAR LIMITED WARRANTY
This WHYNTER wine cooler is warranted, to the original owner within the 48 continental
states, for one year from the date of purchase against defects in material and workmanship
under normal use and service. Should your WHYNTER wine cooler prove defective within
one year from the date of purchase, return the defective part or unit, freight prepaid (within
two months of purchase; after two months to one year, customer will be responsible for
freight cost to Whynter’s service department), along with an explanation of the claim to
Whynter LLC. Please package the wine cooler carefully in its original packaging material to
avoid damage in transit. Please retain original box and packaging material. Under this
warranty, Whynter will repair or replace any parts found defective. This warranty is not
transferable. After the expiration of the warranty, the cost of labor and parts will be the
responsibility of the original owner of the unit.
THIS WARRANTY DOES NOT COVER:
Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
Damage, accidental or other wise, to the wine cooler while in the possession of a
consumer not caused by a defect in material or workmanship;
Damage caused by consumer misuse, tampering, or failure to follow the care and
special handling provisions in the instructions.
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations to the wine cooler by anyone other than
authorized by the manufacturer.
Freight and Insurance cost for the warranty service.
To obtain service or information, contact
call 866-WHYNTER.
|