ELECTRIC ACOUSTIC GUITAR
CJX-12S
SERVICE MANUAL
SYSTEM40
NOTE: See parts list of the SENSOR PICKUP SYS-
TEM40 (EG 011428 ) service manual for de-
tails of the pre-amplifier assembly and the cir-
cuit board component parts.
CONTENTS
OVERALL ASSEMBLY
............................................. 2
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic
(Where applicable) components may also contain traces of chemicals found by the California Health and Welfare
Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS INYOUR MOUTH FOR ANY
REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands
before handling food.
This document is printed on chlorine free (ECF) paper with soy ink.
011599
20010910-85000
EG
HAMAMATSU, JAPAN
Printed in J apan ’01.09
1.019K-95
|